Types of RC aerobatics

|

       Types of RC Aerobatics Pattern, Scale, and 3D!

       Which type is for you?

       RC Aerobatics is the art of performing tricks or stunts with your RC airplane. Each trick or stunt is called an aerobatic maneuver. Some basic maneuvers include loops, rolls, or knife-edges. But these are only the tip of the iceberg! As you might imagine, many RC pilots spend an incredible amount of time perfecting these maneuvers in order to compete with one another. There are basically two types of RC Aerobatics. There is Precision Aerobatics, also known as Pattern Flying. And then there is the ever-popular 3D flying!

       Precision Aerobatics

       Presicion aerobatics requires that a predetermined set of maneuvers be performed flawlessly in front of a set of judges, regardless of wind conditions.

     Precision aerobatics is definitely not a spectator sport. As a matter of fact, it may seem kind of boring for the average person to watch. But if you’re the pilot, it’s the most addicting type of RC aerobatics you’ll ever experience. You are constantly striving to do a just a little bit better regardless of your skill level! Why does it seem boring? Well, mainly because it’s the pilot’s job to make it looks boring! An unfamiliar spectator has no idea how much skill it takes to make the airplane fly each maneuver flawlessly regardless of the speed or direction of the wind. There are two types of Precision aerobatic competitions. There is Pattern Flying, and there is Scale Aerobatics.

       Pattern Flying

       Pattern Flying is a very precise type of precision Aerobatics. It is often compared to ice skating as it’s a very graceful type of flying and the judges deduct for imperfections that the average person would never notice. Pattern planes are specifically designed to fly aerobatic maneuvers perfectly, which is the main difference between pattern flying and Scale Aerobatics. 

       The only restrictions are that a pattern plane’s length and wingspan be less then 2 meters, and the total weight must be less than 11 lbs. These types of RC planes are also referred to as 2-meter planes.

       Scale Aerobatics

       Scale RC aeobatrics are similar to Pattern Flying in the fact that a predetermined set of maneuvers must be performed in front of a set of judges. The big difference between Pattern Flying and Scale RC Aerobatics is the airplanes themselves. Pattern Planes are specifically designed to perform aerobatic maneuvers flawlessly. They really have no limitations other than size and weight. In contrast, there are many real-life practical limitations involved with designing a full-scale airplane. In other words, a scale model will have all of the bad characteristics of its full-scale counterparts.

       Scale RC Aerobatics puts more emphases on emulating their full-scale counterparts where as Pattern Flying concentrates on perfecting each maneuver with more precision and accuracy than any full-scale airplane could possibly achieve. The International Miniature Aerobatic Club (IMAC) is the AMA special interest group designated to RC Scale Aerobatics competitions.

       3D Aerobatics

       3D RC aerobatics is a relatively new type of RC aerobatics. 3D airplanes have a very high thrust to weight ratio which allows them to pretty my hover like a helicopter would.

       When the plane is actually being kept in the air from the thrust of the prop, and is not actually flying from the lift of its wings, it is considered a high alpha maneuver, meaning high angle of attack. It’s really impressive to watch a skilled 3D pilot in action, and it’s much harder than it looks!

       Getting an airplane to hover is a lot like trying to balance a pencil on the end of your finger. It’s very unstable and takes constant rudder, elevator, and aileron corrections to keep steady. 3D aerobatics is a growing aspect of the hobby that some pilots love, and quite frankly others hate! It definitely takes a skilled set of thumbs and tons of practice (and broken planes) to pull off some of these insanely crazy maneuvers, that’s for sure!

       Ok, I guess it’s hard to believe that any true RC fanatic would hate any type of RC airplane. But there is a lot of friendly and kindhearted bickering back and forth between some of the dedicated precision aerobatic pilots and hardcore 3D guys. Many pilots do both and everyone respect the fact that both types of flying take an enormous amount of talent. 3D RC aerobatics really doesn’t have a home of its own so to speak. Most IMAC competitions tack on a 4 minute free style event after all the precision flying is complete. But it’s more or less an afterthought after the main attraction so to speak. The International Extreme Flight Championships, sponsored by Futaba, is one of the few events that are dedicated to 3D competition.

Read also

Leave a Reply

Types of RC aerobatics

Leave a Reply